Roller Shutter Door Forming Machine

Roller Shutter Door Forming Machine can mass-produce high-quality shutter doors.
The line consists of decoiler, sheet guiding equipment, roll forming section, cutter, supporter, hydraulic system, control system. The roller shutter which made by this machine have neat external appearance, even ripples, high utilization and strong strength.

2. Technical Parameters

No

Item

Parameter

Note

1 Suitable

 

Material

Type Steel sheet
Roller Shutter Thickness: 0.7-1.0 mm
2 Product Specifications Detail as the attached drawing
3 Power Requirement Type 380V/3PH/50HZ
Main motor power(KW) 3
Cutting power(KW) 2.2
4 Forming Speed(m/min) 15-18
6 Forming Stand 12 Depend on actual design
7 Forming Shaft Diameter(mm) 65 Depend on actual design
8 Type of Cutting Roll-formed and length-set cutting
9 Control System Mitsubishi PLC and inverter
10 Run Out Table 2mX3
11 Installation Dimension(m) 8X1.5 Without the panel length
12 Total Weight(T) 8 Depend on actual design

Control system PLC
thickness 0.25-0.6mm
Forming speed 12m/min

1,The colored steel tiles produced by this roll forming machine look beautiful,eleglant and noble.they are widly used as the roof of garden,factory,hotel,exhibition center and villa,etc.

 

Components of line

   No        name   qty
   1       decoiler    1
   2 Automatic control system    1
   3    Hydraulic system    1
   4     Automatic cutting    1
   5 Products receiving tables    1

process of line

Decoiler-active feeding-coil strip leveing –roll forming -measure length-cut to length-product packing

technical datas

        Description      Specification
 1       Main moter power        3 kw
 2       Hydaulic sation power        4 kw
 3      Hydraulic station pressure       10-12 MPa
 4       Control system        PLC
 5       thickness        0.25-0.6mm
 6       Forming speed         12m/min
 7       Effective width         840mm
 8       Hydraulic oil pump         CBN-E310
 9      Diameter of principal axis         85mm
 10        Frame thickness         20mm
 11        sprocket          P-25.4
 12       Material of roller 45#steel hard chrome palting
 13        Extemal dimension 6200mm*1350mm*1300mm
 14        Total weight         2.2 T
15 Equipment parts:includes:roll forming system,hydraulic system,PLC frequency conversion control system,counter,cutting system,product supporter.

Terms

Terms
Delivery: in stock
Package: package for container
Payment: T/T(30% T/T pay in advance ,the balance by T/T when we sending the machine)
Validity :good for 30 days

Leave a Reply

Your email address will not be published. Required fields are marked *